How to Change the Password on a Zong Device

How to Change Zong Device Password

AliLast Updated: July 17, 2022

0 1 minute read

We will show you how to change the Zong device’s interface or wifi password. All you have to do is follow the steps outlined below.

Press the hard reset button for 6 to 8 seconds, or until the MBB device notification lights blink briefly.
Then press and hold the hard reset button.
Connect the device to a laptop/PC/Tablet, etc., and launch the online user interface (192.168.8.1), which will also appear when the device is plugged in.
Enter the default username/password “admin” and successfully enter the interface.
Navigate to the top settings menu > For an interface password change, go to the left side system menu and then to the submenu modify password>.
Enter the current password (admin) and the new password, then re-enter the confirm password and click the apply button.
Then click the login button after entering the default username “admin” and a new password.
To begin, select WLAN, then WLAN Basic Settings, and then enter your new password in the WPA pre-shared key field. And then press the “apply” button. You’ve altered your password.

To begin, press the hard reset button for 6 to 8 seconds or until the MBB device notification lights blink briefly.
Connect the device to a laptop/PC/tablet, for example.
Open the browser and type 192.168.8.1 into the URL box before pressing the enter key.
Select the top Setting menu.
Enter “admin” as the default username and password.
Go to System> Change Password
next, and follow the following steps;

8. If you changed the admin password, login again with the new password. to alter the wifi’s name and password

Navigate to WLAN and Submenu. WLAN Basic Configuration SSID: In the box WPA pre-shared key:
enter your wifi name. Enter your new password here.
Select the Apply button.